manualshive.com logo in svg

Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010, Руководство по настройке

Поделиться
Скачать
Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010 Скачать руководство пользователя страница 70

■

Use the 

no

 version of the command with the 

indexInteger

 parameter to delete

a specific virtual router from a group. If all virtual routers in a group are deleted,
the group is also deleted; a group must contain at least one virtual router.

■

See aaa virtual-router

deadtime

■

Use to configure the amount of time (0–1440 minutes) that a server is marked
as unavailable if a request times out for the configured retry count.

■

If a server fails to answer a request, the router marks it 

unavailable

. The router

does not send requests to the server until the router receives a response from
the server or until the configured time is reached, whichever occurs first.

■

If all servers fail to answer a request, then instead of marking all servers as
unavailable, all servers are marked as available.

■

To turn off the deadtime mechanism, specify a value of 0.

■

Example

host1(config)#

radius authentication server 10.10.0.1

host1(config-radius)#

deadtime 10

■

Use the 

no

 version to set the time to the default value, 0

■

See deadtime

key

■

Use to configure secrets on the primary, secondary, and tertiary authentication
servers.

■

The authentication or accounting server secret is a text string used by RADIUS
to encrypt the client and server 

authenticator

 field during exchanges between

the router and a RADIUS authentication server. The router encrypts PPP PAP
passwords using this text string.

■

The default is no server secret.

■

Example

host1(config)#

radius authentication server 10.10.8.1

host1(config-radius)#

key gismo

■

Use the 

no

 version to remove the secret.

NOTE:

Authentication fails if no key is specified for the authentication server.

■

See key

logout subscribers

30

■

Configuring RADIUS Authentication and Accounting Servers

JUNOSe 11.1.x Broadband Access Configuration Guide

Содержание JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010



























































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды