manualshive.com logo in svg

Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010, Руководство по настройке

Поделиться
Скачать
Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010 Скачать руководство пользователя страница 661

■

The shared interface is operationally up when the layer 2 interface is operationally
up and IP is properly configured.

■

You can create operational shared IP interfaces in the absence of a primary IP
interface.

■

Example

host1(config-if)#

ip share-interface atm 5/3.101

■

Use the 

no

 version to remove the association between the layer 2 interface and

the shared IP interface. You can delete shared and primary IP interfaces
independently.

■

See ip share-interface

ip share-nexthop

■

Use to specify that the shared IP interface dynamically tracks a next hop. If the
next hop changes, the shared IP interface moves to the new layer 2 interface
associated with the IP interface toward the new next hop.

■

If you issue this command on a shared IP interface, you cannot issue the 

ip

share-interface

 command for the interface.

■

If you issue this command on a shared IP interface, the shared interface cannot
dynamically track the next hop for the specified destination if the next-hop IP
address is resolvable over MPLS.

■

If you specify a virtual router, the command fails if the VR does not already exist.
If you do not specify a VR, the current VR is assumed.

■

After creating the shared IP interface, you can configure it as you do any other
IP interface.

■

The shared interface is operationally up when the layer 2 interface associated
with the specified next hop is operationally up and IP is properly configured.

■

Example

host1(config-if)#

ip share-nexthop 192.168.10.16

■

Use the 

no

 version to halt tracking of the next hop.

■

See ip share-nexthop

ip source-prefix

■

Use to specify a source address for a subscriber interface.

■

On the ERX1440 router or the E320 router, you can configure up to 1024 subnets
for static subscriber interfaces per primary IP interface when each subnet has a
variable network mask that is less than /32. The number of subnets identifying
a single route (/32) is still limited by the global maximum of 16,000 hosts per
line module.

■

Example

host1(config-if)#

ip source-prefix 192.168.0.0 255.0.0.0

Configuring Static Subscriber Interfaces

■

621

Chapter 25: Configuring Subscriber Interfaces

Содержание JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010



























































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды