manualshive.com logo in svg

Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010, Руководство по настройке

Поделиться
Скачать
Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010 Скачать руководство пользователя страница 425

Related Topics

■

l2tp tunnel-switching

Creating Persistent Tunnels

The E Series router supports persistent tunnels. A persistent tunnel is one that is
configured to remain available. Persistent tunnels have only local significance; that
is, they apply only to the end of the tunnel where they are set. If the other end of
the tunnel chooses to terminate the tunnel, the tunnel is removed.

■

To create a persistent tunnel, you configure an idle-timeout value of zero.

host1(config)#

l2tp tunnel idle-timeout 0

Related Topics

■

l2tp tunnel idle-timeout

Testing Tunnel Configuration

You can use the 

l2tp tunnel test

 command to force the establishment of a

tunnel—this enables you to verify both the tunnel configuration and connectivity.

This command supports tunnel initiation: incoming calls on the LAC; outgoing calls
on the LNS. The command does not support tunnel respondent: outgoing calls on
the LAC; incoming calls on the LNS.

■

To test a tunnel configuration:

host1#

l2tp tunnel test portland.com gold

Related Topics

■

l2tp tunnel test

Managing L2TP Destinations, Tunnels, and Sessions

When the router is established as an LNS you can manage the destinations, tunnels
and sessions.

■

Enable the verification of data integrity via UDP.

■

Specify the time period for which the router maintains dynamic destinations,
tunnels, or sessions after termination.

■

Prevent the creation of new sessions, tunnels, and destinations.

■

Close and reopen all or selected destinations, tunnels, and sessions.

Creating Persistent Tunnels 

■

385

Chapter 13: Configuring an L2TP LNS

Содержание JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010



























































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды