Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010, Руководство по настройке

Страница: 301 / 794

Table 49: RADIUS IETF Attributes Supported by JUNOSe Software (continued)
Description Attribute Name
Attribute
Number
Maximum number of consecutive seconds of service to be provided to the user
before termination of the session Session-Timeout [27]
Maximum number of consecutive seconds of idle connection provided to the user
before termination of the session Idle-Timeout [28]
■
Allows the NAS to send the phone number that the user called
■
Not supported for nontunneled or LAC session side
■
For the LNS, the format is the string passed in the Called Number AVP
■
For RADIUS relay server, indicates the subscriber’s wireless access point
Called-Station-Id [30]
■
Allows the NAS to send the phone number from which the call originated
■
See the radius calling-station-format and the radius
calling-station-delimiter commands in “Configuring RADIUS Attributes” on
page 171.
■
For RADIUS relay server, indicates the subscriber’s MAC address
Calling-Station-Id [31]
■
Identifies the NAS originating the request
■
System-wide configurable hostname or VR-sensitive configurable NAS-identifier
name
NAS-Identifier [32]
E Series router’s port ID and IP address Proxy-State [33]
Indicates whether this Accounting-Request marks the beginning of the user service
(Start), the end (Stop), or the interim (Interim-Update) Acct-Status-Type [40]
Indicates how many seconds the client has been trying to send a particular record Acct-Delay-Time [41]
■
Indicates how many octets have been received from the port during the time
this service has been provided
■
IP subscriber manager—Statistics are reported
■
PPP—Statistics are counted according to the rules of the generic interface
MIB
Acct-Input-Octets [42]
■
Indicates how many octets have been sent to the port during the time this
service has been provided
■
IP subscriber manager—Statistics are reported
■
PPP—Statistics are counted according to the rules of the generic interface
MIB
Acct-Output-Octets [43]
■
Unique accounting identifier that makes it easy to match start and stop records
in a log file
■
See the radius acct-session-id-format and the radius include acct-session-id
access-request commands in “Configuring RADIUS Attributes” on page 171.
Acct-Session-Id [44]
■
Indicates how the user was authenticated: whether by RADIUS, the NAS itself,
or another remote authentication protocol
■
Always 1
Acct-Authentic [45]
RADIUS IETF Attributes
■ 261
Chapter 6: RADIUS Attribute Descriptions