manualshive.com logo in svg

Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010, Руководство по настройке

Поделиться
Скачать
Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010 Скачать руководство пользователя страница 407

NOTE:

Always configure the lockout timeout to be shorter than the destruct timeout.

The destruct timeout (as described in “Specifying a Destruct Timeout for L2TP Tunnels
and Sessions” on page 345) overrides the lockout timeout—when the destruct timeout
expires, all information about the locked out destination is deleted, including the
time remaining on the destination’s lockout timeout and the requirement to run a
lockout test prior to returning the destination to service. As a result, the locked out
destination might be returned to service prior to expiration of your configured lockout
timeout and without completion of the lockout test you specified.

Figure 9 on page 367 shows how locked-out destinations transition from a locked-out
state to available status when using the default lockout configuration, a configuration
that includes a modified lockout timer, and a configuration with both a modified
timer and the lockout test.

Figure 9: Lockout States

You can use the following commands to manage L2TP destination lockout and
configure a lockout process that meets the needs of your network environment:

■

Use the 

l2tp destination lockout-timeout

 command to modify the default

lockout timeout period.

■

Use the 

l2tp destination lockout-test

 command to configure L2TP to perform

a lockout test, which verifies that a currently locked out destination is now
available and to include it in the selection algorithm.

■

Use the 

l2tp unlock destination

 command to force L2TP to immediately unlock

the specified locked out destination; the destination is then considered to be
available by the selection algorithm. L2TP disregards any time remaining in the
existing lockout timeout and also disregards the lockout test (if configured).

■

Use the 

l2tp unlock-test destination

 command to force L2TP to immediately

begin the lockout testing procedure for the specified destination; any time
remaining in the existing lockout timeout is not taken into account.

■

Use the 

show l2tp

 and 

show l2tp destination lockout

 commands to view

information about the L2TP configuration and statistics.

Modifying the Lockout Procedure

■

367

Chapter 12: Configuring an L2TP LAC

Содержание JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010



























































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды