manualshive.com logo in svg

Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010, Руководство по настройке

Поделиться
Скачать
Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010 Скачать руководство пользователя страница 505

2.

Direct the router to request IP addresses for remote users from the DHCP
server(s).

host1(config)#

ip address-pool dhcp

Related Topics

ip address-pool

■

■

ip dhcp-server

Logging DHCP Packet Information

The JUNOSe software enables you to collect and log DHCP packet information for
all JUNOSe DHCP access models on a per-interface basis. To log packets for a specific
DHCP application, you enable DHCP packet logging on the interface that serves the
application. JUNOSe software supports per-interface DHCP packet logging on a
maximum of 16 interfaces. Per-interface DHCP packet logging is disabled by default.

You can specify which packets are logged—receive, transmit, or all. You can optionally
assign low or high priority to the logged packets. Packets are assigned a low priority
by default, which does not interfere with router DHCP packet processing. The logged
packets are output to the dhcpCapture event logging category.

You can configure per-interface DHCP packet logging on statically configured and
dynamically created IP interfaces. However, configuration information for dynamic
interface configurations is lost after a cold restart. Both static and dynamic interface
configuration information is maintained after a warm restart.

You use the

 ip dhcp-capture

 command with the following keywords to enable DHCP

packet logging for all DHCP applications on the interface.

■

Use the 

receive

, 

transmit

, and 

all

 keywords to specify the type of DHCP packets

that is logged.

■

Use the optional 

priority

 keyword to assign a 

low

 or 

high

 priority to logged

packets. By default, logged packets have a low priority and do not interfere with
the router’s DHCP packet processing.

You can specify DHCP packet logging on a maximum of 16 interfaces.

■

To enable DHCP packet logging:

host1(config-if)#

ip dhcp-capture all

Logging DHCP Packet Information

■

465

Chapter 17: DHCP Overview

Содержание JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010



























































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды