manualshive.com logo in svg

Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010, Руководство по настройке

Поделиться
Скачать
Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010 Скачать руководство пользователя страница 671

■

Use the 

no

 version to remove the IP address or to disable IP processing.

■

See ip address

ip auto-configure ip-subscriber

■

Use to configure an IP interface to support creation of dynamic subscriber
interfaces. The specified IP interface is considered the primary interface.

■

The router creates the required dynamic subscriber interfaces when the IP address
is assigned to the associated subscriber. The address might be assigned by an
external DHCP server, the DHCP local server, or the packet detect feature.

■

Use the 

include-primary

 keyword to specify that the primary interface can be

assigned to a subscriber. Use the 

exclude-primary

 keyword to specify that the

primary interface is not used for subscribers. The primary interface is not assigned
to a subscriber by default.

■

You can issue this command from Interface Configuration mode, Subinterface
Configuration mode, or Profile Configuration mode.

■

Example

host1(config-if)#

ip auto-configure ip-subscriber include-primary

■

Use the 

no

 version to disable creation of dynamic subscriber interfaces associated

with this primary IP interface. Use the 

no

 version with the 

include-primary

keyword to specify that the primary interface is not assigned to a subscriber.

■

See ip auto-configure ip-subscriber

ip auto-detect ip-subscriber

■

Use to set the router’s packet detect feature and specify that IP automatically
detect packets that do not match any entries in the demultiplexer table. When
an unmatched packet is detected, an event is generated that determines whether
to create a dynamic subscriber interface.

■

Example

host1(config-if)#

ip auto-detect ip-subscriber

■

Use the 

no

 version to restore the default, in which packet detection is disabled.

■

See ip auto-detect ip-subscriber

ip dhcp-local pool

■

Use to access DHCP Local Pool Configuration mode.

■

The DHCP local server uses pool names other than default to maintain
configuration information for subscribers to a particular domain.

■

Example

host1(config)#

ip dhcp-local pool ispBoston

Configuring Dynamic Subscriber Interfaces

■

631

Chapter 25: Configuring Subscriber Interfaces

Содержание JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010



























































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды