Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010, Руководство по настройке

Страница: 125 / 794

Table 8: Supported RADIUS Acct-Terminate-Cause Codes (continued)
Description Name Code
DCD was dropped on the port Lost Carrier 2
Service can no longer be provided; for example, the user’s
connection to a host was interrupted Lost Service 3
Idle timer expired Idle Timeout 4
Subscriber reached the maximum continuous time allowed for
the service or session Session Timeout 5
System administrator reset the port or session Admin Reset 6
System administrator terminated the session on the NAS; for
example, prior to rebooting the NAS Admin Reboot 7
NAS detected an error on the port that required ending the
session Port Error 8
NAS detected an error (other than on the port) that required
ending the session NAS Error 9
NAS ended the session for a non-error reason NAS Request 10
NAS ended the session due to a non-administrative reboot NAS Reboot 11
NAS ended the session because the resource usage fell below
the low threshold; for example, the bandwidth-on-demand
algorithm determined that the port was no longer needed Port Unneeded 12
NAS ended the session to allocate the port to a higher-priority
use Port Preempted 13
NAS ended the session to suspend a virtual session Port Suspended 14
NAS was unable to provide the requested service Service Unavailable 15
NAS is terminating the current session in order to perform
callback for a new session Callback 16
An error in the user input caused the session to be terminated User Error 17
The login host terminated the session normally Host Request 18
Supplicant state machine was reinitialized Supplicant Restart 19
A previously authenticated supplicant failed to reauthenticate
successfully following expiration of the reauthentication timer
or explicit reauthentication request by management action Reauthentication
Failure 20
The port's MAC has been reinitialized Port Reinitialized 21
The port has been administratively disabled Port Administratively
Disabled 22
Mapping Application Terminate Reasons to RADIUS Terminate Codes
■ 85
Chapter 1: Configuring Remote Access