Juniper HarvestMaster mirus H2, Руководство пользователя

Страница: 48 / 130

Mirus for H2 Classic GrainGage
48 H2 Classic GrainGage Calibration
4.2.2 Check Weigh Bucket Calibration
Weigh bucket calibration is stable. It rarely changes or loses accuracy. However, because the consequences
of poor calibration can be devastating to your research data, HarvestMaster highly recommends checking
the weigh bucket calibration every year before the harvest season begins, as well as every day before
harvest. This can be done on the Weight Diagnostics screen.
1. After calibrating the weigh bucket, tap the gear icon
below the calibration wizard to open Diagnostics.
2. Hang the calibration weight from each of the weight
hangers.
3. The Diagnostics screen should report Weight readings
that are very close to the value stamped on the
calibration weight. If it’s not within .05 lb (23 g) with
the combine off, HarvestMaster recommends a new
weight calibration.
4. Tap the check icon to close Diagnostics.
4 .3 Test Weight Calibration
Test weight load cell calibration ensures the accuracy of the GrainGage’s weight calculations. This
calibration should be done on initial setup.
4.3.1 Calibrate Test Weight
Use the test weight load cell calibration wizard and the smaller calibration weight (3 lb (1.4 kg)) included
with the GrainGage to calibrate the test weight chamber load cell.
1. Park the combine on a level surface.
2. Shut off the engine and keep the GrainGage powered
on.
3. Make sure the test chamber is empty.
4. Go to
Home
>
Setup
>
H2 GrainGage
.
5. Tap Calibration .