Juniper HarvestMaster mirus H2, Руководство пользователя

Страница: 119 / 130

Mirus for H2 Classic GrainGage
119 Harvest Mode
The following table explains each stage of the Start/Cycle/Go button during harvest.
Countdown Mode
Button
Stage
Operator Action Harvest Stage
1 . Enter press . Harvest begins .
2 .
Enter press at the
end of the plot .
The GrainGage is waiting for the trip point to be met or
an Enter press at the end of the plot . The GrainGage can
cycle several times through the plot until the weight trip
no longer occurs .
Note: The amount of grain in the weigh bucket can be seen
on the Real Time Weight screen. Wait until the weight has
peaked and stabilized before initiating the countdown.
An Enter press begins the countdown .
Note: If the weight trip is triggered during the countdown,
the timer will continue as the GrainGage cycles. If the timer
has reached zero by the time the weigh cycle finishes, the
flush cycle will begin. If the timer hasn’t reached zero, it will
continue to count down to zero before starting the flush
cycle.
3 .
Wait until the
countdown ends .
The countdown indicates the grain is being delivered to
the weigh system .
4 . N/A
The yellow cycle indicator briefly appears to show the
isolation gate is closing and the GrainGage is starting to
cycle .
5 .
Proceed to the next
plot .
The isolation gate is closed . The GrainGage is running the
flush cycle and it is ready to harvest the next plot .
6 . N/A
The isolation gate is opened . The GrainGage is ready for
the next plot .
7 .
Return to #2 at the
end of the next plot .
Mirus is ready to begin the cycle for the next plot .