Jungheinrich ERE 120, Руководство по эксплуатации

Страница: 83 / 179

02.15 EN
82
4.9.1 Raising a load
Requirements
– Load correctly palletised.
– Load weight matches the truck's capacity.
– Load handler evenly loaded for heavy loads.
Procedure
• Drive the truck carefully up to the pallet.
• Drive the load handler slowly into the pallet until the pallet is against the back of the
load handler (see graphic to the right).
Z
The load must not extend by more than 50 mm beyond the load handler tips.
• Raise the load handler until the desired height is reached, (see page 80).
The load is being raised.
NOTE
Risk of material damage to the hydraulic unit
When the mechanical stops of the load handler have been reached, release the "raise
load handler" button. Otherwise the hydraulic unit may suffer material damage.
Ergonomic lift (
o
) (ERE C20)
When the "Load handler lift" (50) button is pressed when the load handler is loaded,
support arm lift is raised first and then mast lift, see page 85.
o