Jungheinrich ERE 120, Руководство по эксплуатации

Страница: 81 / 179

02.15 EN
80
4.8.1 Raising the load handler
Requirements
– Prepare the truck for operation, see
"Preparing the truck for operation" on page 62.
Procedure
• Press the “Raise load handler ” button (50) until you reach the desired lift height.
NOTE
Risk of material damage to the hydraulic unit
When the mechanical end stop of the load has been reached, release the "Raise load
handler" button. Otherwise the hydraulic unit could suffer material damage.
The load handler is raised.
Ergonomic lift (
o
) (ERE C20)
When the "Load handler lift" (50) button is pressed when the load handler is loaded,
support arm lift is raised first and then mast lift, see page 85.
4.8.2 Lowering the load handler
Requirements
– Prepare the truck for operation, see "Preparing the truck for operation" on page 62.
Procedure
• Press the “Lower load handler” button (49) until you reach the desired lift height.
The load handler is lowered.
Ergonomic lift (
o
) (ERE C20)
When the "Load handler lower" (49) button is pressed when the load handler is
loaded, main lift is lowered first and then support arm lift, see page 85.
49 50 49
50
o
o