Jungheinrich ERE 120 Скачать руководство пользователя

Страница: 78 / 179

02.15 EN

4.6

Steering

Procedure

• Move the tiller (6) to the left or right.

The truck is steered in the required direction.

4.7

Brakes

WARNING!

Accident risk

The brake pattern of the truck depends largely on the ground conditions.

The operator must take into account the travel route conditions when braking.

Brake with care to prevent the load from slipping.

Allow for increased braking distance when travelling with an attached load.

Use the service brake in emergencies.

CAUTION!

In hazardous situations swing the tiller to the brake position or press the emergency
disconnect switch.

The truck can brake in three different ways:

– By using the service brake (brake zone B).
– With the coasting brake.
– By inversion braking (braking and changing direction).

Содержание ERE 120




















































































































































































Результаты поиска

Содержание ERE 120

Отзывы:

Похожие инструкции для ERE 120

Бренды по названию

Популярные бренды

Jungheinrich ERE 120, Руководство по эксплуатации

Результаты поиска

Содержание ERE 120

Отзывы:

Похожие инструкции для ERE 120

Бренды по названию

Популярные бренды