Jungheinrich ERE 120, Руководство по эксплуатации

Страница: 156 / 179

155
02.15 EN
Ergonomic lift
Lift cutout
Impact sensor / data recorder
Lateral Battery Removal
Access module
Issued on: 31/10/2014 10:13:34
Hydraulic Operations W A B C
1 Test the lift sensors in the mast and initial lift and check for damage.
t
2
Check settings and wear levels of slide pieces and stops and adjust
the slide pieces if necessary.
t
3 Check load chain setting and tension if necessary.
t
4
Check lateral clearance of the mast connections and the fork
carriage.
t
5
Visually inspect the mast rollers and check contact surface wear
level.
t
6 Test emergency lowering system.
t
7 Test lift and lowering speeds.
t
Hydraulic Operations W A B C
1 Test lift cutout, check for damage and make sure it is secure.
t
Electrical W A B C
1
Check impact sensor / data recorder are secure and check for
damage.
t
Power supply W A B C
1 Test battery lock / battery attachment.
t
Electrical W A B C
1 Test access module, check for damage and make sure it is secure.
t