Jungheinrich ERE 120, Руководство по эксплуатации

Страница: 69 / 179

02.15 EN
68
the lift shaft. Persons riding in the lift with the forklift truck must only enter the lift after
the truck has come to a rest and must leave the lift before the truck. The driver must
ensure that the loading ramp / dock cannot move or come loose during loading /
unloading.
Type of loads to be carried
The operator must make sure that the load is in a satisfactory condition. Loads must
always be positioned safely and carefully. Use suitable precautions to prevent parts
of the load from tipping or falling down. Prevent liquid loads from sloshing out.
WARNING!
Electromagnetic influence can result in accidents
Strong magnets can cause electronic components such as Hall sensors to become
damaged, resulting in accidents.
X Do not use magnets in the operating area of the truck. Exceptions to this rule are
commercial, weak clamping magnets for attaching notices.
4.2 How to act in hazardous situations
CAUTION!
If the truck is in danger of tipping over or falling off a loading ramp, proceed as
follows:
X Abandon the truck.
Z
When travelling on a loading ramp, avoid steering and fold in the side arms as
required to facilitate leaving the truck if it tips over.