Jungheinrich ERE 120, Руководство по эксплуатации

Страница: 86 / 179

85
02.15 EN
4.10 Ergonomic Lift (
o
) (ERE C20)
For lifting and lowering, the truck is equipped with support arm lift (initial lift) with the
maximum lift capacity and mast lift (high lift) with a lower lift capacity, see "Truck
capacity plate" on page 32.
Raises the load handler
When the "Load handler lift" (50) button is pressed when the load handler is loaded,
support arm lift is raised first and then mast lift, see "Raising the load handler" on
page 80.
Lowers the load handler
When the "Load handler lower" (49) button is pressed when the load handler is
loaded, main lift is lowered first and then support arm lift, see "Lowering the load
handler" on page 80.
Lifting, transporting and depositing loads
Do not travel with a raised load (>500 mm). Lower the forks for proper transport
(approx. 150 - 500 mm above the ground), see page 83.
Raising, transporting and depositing loads see page 81.
Use as an elevated work table
The raised load handler can be used as an elevated work table when the truck is
switched off, see page 86.
o