Jungheinrich ERE 120, Руководство по эксплуатации

Страница: 139 / 179

02.15 EN
138
4.3 Lifting and jacking up the truck safely
WARNING!
Lifting and jacking up the truck safely
In order to raise the truck, the lifting gear must only be secured to the points specially
provided for this purpose.
You may only work under a raised load handler if it has been secured with a
sufficiently strong chain or the fastening bolt.
In order to raise and jack up the truck safely, proceed as follows:
X
Jack up the truck only on a level surface and prevent it from moving accidentally.
X Always use a jack with sufficient capacity. When jacking up the truck, take
appropriate measures to prevent it from slipping or tipping over (e.g. wedges,
wooden blocks).
X In order to raise the truck, the lifting gear must only be secured to the points
specially provided for this purpose, see "Transport and Commissioning" on
page 33.
X When jacking up the truck, take appropriate measures to prevent it from slipping or
tipping over (e.g. wedges, wooden blocks).
Raising and jacking up the truck securely
Requirements
– Prepare the truck for maintenance and repairs (see "Prepare the truck for
maintenance and repairs" on page 136).
Tools and Material Required
– Jack
– Hard wooden blocks
Procedure
• Place the jack against the contact point.
Z
Jack contact point, see "Identification Points and Data Plates" on page 29.
• Raise the truck.
• Support the truck with hard wooden blocks.
• Remove the jack.
The truck is now securely raised and jacked up.