manualshive.com logo in svg

Jungheinrich ERE 120, Руководство по эксплуатации

Поделиться
Скачать
Jungheinrich ERE 120 Скачать руководство пользователя страница 75

02.15 EN

74

Travelling in rider mode

Requirements

– Starting up the truck, see "Starting up the truck" on page 61

Procedure

• Swing out both folding side arms (11) (

o

).

Z

Both side arms must always be folded in or out; otherwise all functions are
deactivated (E-1926).

• Fold down and step on the operator platform (10).
• Swing the tiller (6)in to the travel zone (F).
• Push the travel switch (5) to the desired travel direction: forward (V) or reverse (R). 

Z

When the travel switch is released, it automatically returns to the neutral position.

• Control the travel speed with the travel switch (5).

The brakes are released and the truck moves in the selected direction.

NOTE

X

Travelling is inhibited when the operator platform is vacated and the side arms are
not folded out.

X

ERE 120: If the standing platform is occupied and the side arms are not folded out,
the truck can only be operated at reduced speed.

X

If the operator platform is occupied and only one side arm is folded out, travelling
is inhibited.

Содержание ERE 120




















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды