Jungheinrich ERE 120, Руководство по эксплуатации

Страница: 126 / 179

125
02.15 EN
7.7 CanDis Display Instrument (
o
)
The instrument indicates:
Charge status display
The charge status is shown through eight LED bars.
Eight lit LED bars correspond to a fully charged battery. One lit LED bar corresponds
to an almost discharged battery.
When the "Attention" symbol (66) starts to flash, it is advisable to charge the battery.
If the "Attention" symbol (66) is lit steadily, the battery must be charged.
If the "Stop" symbol (67) is lit steadily, the battery must be charged immediately. If
activated, the discharge monitor function is applied in this case, see "Discharge
monitor function" on page 126.
Z
The point at which the "Attention" (66) and "Stop" (67) symbols start to light up
differs depending on the battery type.
64
Battery charge display (on board charger
only)
65 LED bars for battery charge status
66
"Warning" symbol (yellow),
Battery charge recommended
67
"Stop" symbol (red); lift cutout,
Battery charge essential
68
No symbol when battery type set to normal
or enhanced performance wet cell battery
"T" symbol appears steadily during
operation when battery type set to
maintenance-free
"T" symbol appears flashing during
operation when battery type set to special,
such as XFC
69
6 digit LCD display:
– Service hours
– Settings entry and changes
– Event messages
64
66
68
65
67
69
o