Jungheinrich ERE 120 Скачать руководство пользователя

Страница: 105 / 179

02.15 EN

104

7.2.7 Delete individual user codes

Requirements

– To prepare the truck for operation, see "Preparing

the truck for operation with the keypad (CanCode)"
on page 97.

Procedure

• Press the O key (63).
• Enter the valid master code with the digit keys.

When you enter the valid master code the LED
(62) flashes green.

• Enter the parameters 0-0-3 with the digit keys.
• Confirm with the SET key (61).

The LEDs (59,62) flash green.

• Enter the user code to be deleted with the digit keys.
• Confirm with the SET key (61).

The LEDs (60,62) flash green.

• Enter the user code to be deleted again with the digit keys.
• Confirm with the SET key (61).

Wait until the LED (62) flashes green. The user code is now deleted.

• Press the O key (63).

The truck is switched off and the LED (62) is lit red.

• Check that the user code has been deleted:

• Switch the truck on with the user code to be deleted, see "Preparing the truck for

operation with the keypad (CanCode)" on page 97

After entering the user code the LED (62) flashes red and the truck remains
switched off.

• Press the O key (63).

The truck remains switched off and the LED (62) is lit red.

Set

Содержание ERE 120




















































































































































































Результаты поиска

Содержание ERE 120

Отзывы:

Похожие инструкции для ERE 120

Бренды по названию

Популярные бренды

Jungheinrich ERE 120, Руководство по эксплуатации

Результаты поиска

Содержание ERE 120

Отзывы:

Похожие инструкции для ERE 120

Бренды по названию

Популярные бренды