Jungheinrich ERE 120, Руководство по эксплуатации

Страница: 73 / 179

02.15 EN
72
4.5 Travel
WARNING!
Collision hazard when operating the truck
Collisions with personnel and equipment can result if the truck is operated with open
panels.
X Do not operate the truck unless the panels and covers are closed and properly
locked.
X When travelling through swing doors etc. make sure that the doors do not activate
the collision safety button.
WARNING!
Trapping hazard
Be extremely careful when driving and steering, especially if parts of your body
extend outside the border of the truck.
X Do not reach between the standing platform and the truck frame when you fold up
the platform.
X In pedestrian mode make sure you have sufficient distance from the industrial
truck.
CAUTION!
Trapping hazard from the truck during pedestrian mode
In pedestrian mode the truck can pose a trapping hazard for the operator and other
people.
X Wear personal protective equipment (e.g. safety shoes, ...).
X The truck must be operated with particular care and attention in pedestrian mode.
X
Ensure there are no other people standing between the truck and obstacles when
operating in pedestrian mode.
Z
It is recommended that safety shoes be worn at all times when using the truck in
rider mode to avoid injuries.
Z
A truck without side arms (
t
) behaves like a truck with folded-in side arms.
Anti-roll back device for slow travel on inclines
If the truck does not have sufficient speed to travel up an incline, it may roll back.
Rolling back is detected by the truck's controller and the truck brakes to a halt
immediately.
o
Reduced speed when the load handler is fully lowered I
When the load handler is fully lowered the truck can only travel at reduced speed. The
load handler must be raised in order to use the maximum available speed.
Industrial trucks with a folding standing platform and moving tiller
We distinguish between two travel modes: