Jungheinrich ERE 120, Руководство по эксплуатации

Страница: 154 / 179

153
02.15 EN
10.2.2 Optional Equipment
Aquamatik
Chassis and Superstructure W A B C
1 Check chassis and screw connections for damage.
t
2 Check doors and/or covers.
t
3 Check labels are legible, complete and make sense.
t
4 Test the operator platform and check for damage.
t
5 Check operator mat and steps are non-slip and damage-free.
t
Hydraulic Operations W A B C
1
Test "hydraulic" controls and make sure their labels are legible,
complete and plausible.
t
2 Test lifting mechanism, check for wear, damage and test the settings.
t
3
Check cylinders and piston rods for damage and leaks, and make
sure they are secure.
t
4 Test hydraulic system.
t
5 Replace hydraulic oil filter, ventilation/discharge filter.
k t
6
Check that hydraulic connections, hoses and pipes are secure and
check for leaks and damage.
t
7 Check the hydraulic oil level and top up if necessary.
t
8 Test relief valve and adjust if necessary.
t
9 Replace hydraulic oil.
k t
10 Check the forks or load handler for wear and damage.
t
11 Check tie/plunger rods.
t
Agreed services W A B C
1
Carry out a test run with rated load, if necessary with a customer-
specific load.
t
2 Lubricate truck according to the lubrication schedule.
t
3 Demonstration after servicing.
t
Steering W A B C
1 Check tiller return function.
t
Power supply W A B C
1
Test Aquamatik plug, hose connections and float and check for
leaks.
t
2 Test flow indicator and check for leaks.
t