JUMO Wtrans E01, Руководство по эксплуатации

Страница: 53 / 64

53
10 Setup program
USB connection between the laptop/PC and measuring probe
For setup via USB cable, establish the following connections:
1. Insert the type A USB connector (B) of the USB cable (C) into the laptop/PC (A).
2. Insert the Mini-B USB connector (D) of the USB cable (C) into the Mini-B USB socket (E) of the mea-
suring probe.
3. Remove the Mini-B USB connector (D) after the setup data transfer.
4. Seal the opening on the device using the supplied sealing screw M12 × 1.5 (accessories set) with
the help of the mounting key (accessories set).
NOTE!
If a USB connector is inserted, all measurements are carried out except the CO
2
measurement. The CO
2
measured values are "frozen" in the inserted USB connector. If no measured value is available, "- - - -"
is displayed on the LCD display alongside the measured value number and measurand.
NOTE!
It is not possible to take a CO
2
measurement while a USB connector is inserted.
(A) Laptop/PC (D) Mini-B USB connector
(B) Type A USB connector (E) Mini-B USB socket
(C) USB cable
(A)
(D)
(C)
(B)
(E)
P