JUMO Wtrans E01, Руководство по эксплуатации

Страница: 34 / 64

7 Introduction to operation
34
7.2 Normal display (NA) (displaying measured values)
When the device is started, all segments will be activated (check LCD display). If the LCD display is
switched off, the user can switch on the LCD display for at least 10 s by touching one of the four keys
(LCD display switches off 10 s after the last touch of the key). The same also applies to the illumination
of the LCD display (depending on configuration).
Sample appearance of measured values:
NOTE!
If a USB connector is inserted, all measurements are carried out except the CO
2
measurement. The CO
2
measured values are "frozen" in the inserted USB connector. If no measured value is available, "- - - -"
is displayed on the LCD display alongside the measured value number and measurand.
NOTE!
It is not possible to take a CO
2
measurement while a USB connector is inserted.
NOTE!
A configuration at an ambient temperature of < -10 °C is only possible with the setup program because
of the lengthy response time of the LCD display.
RH
R RH H
Example: humidity Example: temperature
Example: concentration CO
2
Example: absolute humidity