JUMO Wtrans E01, Руководство по эксплуатации

Страница: 30 / 64

5 Mounting
30
5.3 Mounting and dismounting the measuring probe
Fig. 5-1 Mounting (left) and dismounting (right) of the measuring probe
Mount the measuring probe on the DIN rail
The measuring probe is intended for wall mounting on the DIN rail piece according to DIN EN 60715.
The measuring probe is mounted and dismounted as follows:
Mounting
1. Hook the housing into the DIN rail from above.
2. Swing the housing downwards until it engages.
Dismounting
1. Insert the appropriate screwdriver into the metal foot catch and pull downwards.
2. Swing the measuring probe up and out of the DIN rail and remove.
NOTE!
At the mounting site, ensure a minimum clearance of 100 mm below the measuring probe to allow ac-
cess to the metal foot catch for dismounting with a screwdriver. Maintain a minimum clearance of
150 mm from the top if the antenna is fitted directly on the measuring probe.