JUMO Wtrans E01, Руководство по эксплуатации

Страница: 35 / 64

35
7 Introduction to operation
Appearances
Display Description
Measured value 1 without/with decimal place
No sensor connected
Sensor connected, all measurands configured to "no measured value" and/or
"measured value display" not activated
Explanation: no.UA (no.Va) = no Value
Overrange
Underrange
Configuration does not correspond to the connected sensors or the parameters
have to be activated
Transmission failure between controller and sensor
Sensor signals incorrect measurements
Sensor was not connected or not recognized (message only displayed if mea-
surand has fixed configuration).
The measuring probe has adopted the default configuration values. The error
can be reset with a configuration transfer (setup) or by configuring the measur-
ing probe.
Unknown error
RH