JUMO Wtrans E01, Руководство по эксплуатации

Страница: 24 / 64

3 Preparing the measuring probe
24
3.4.2 Installing antenna cable
1. Screw the SMA socket (A) clockwise onto the transmitter (max. 1 Nm).
For the initial startup, parts A to F are in the accessories set.
2. Insert O-ring 16 × 2 mm (B) into the recess of the protective cap (lower section) (C).
3. Move the protective caps (lower section (C) and upper section (D)) down onto the antenna cable.
Manually tighten the protective cap (upper section) (D) onto the knurl so that there is no gap at the
screw connection. Make sure the O-ring (B) is positioned correctly!
4. Install the end of the antenna cable (E) at the desired position (antenna holder for wall mounting ac-
cessories) and screw the antenna (F) clockwise onto the external thread (max. 1 Nm).
(F)
(E)
(D)
(C)
(B)
(A)