JUMO Wtrans E01, Руководство по эксплуатации

Страница: 46 / 64

9 Configuring the transmitter
46
9.2 Parameter level (PA)
This level is used to adapt the measuring probe to its task. Settings can be selected for the individual
parameters or values can be entered within the default limits.
Fig. 9-2 Browsing in steps and jumping in groups
The parameter level comprises an extensive list of editable parameters that are grouped in a user-friend-
ly manner. The key functions shown permit quick browsing up and down or jumping from one group to
another.
If you are in group 1, 2, 3, or 4, the measured value no. is always displayed. Also, the configured mea-
surand is shown within the group. No measurand is displayed for "no measured value". All measurands
are displayed for the "default measured value of the automatically recognized sensor type" (plug and
play).
browse
Group 4 - parameters of the 4th measured value
1) Parameters of the 4th measured value
2) Parameters of
n) Parameters of
the 4th measured value
the 4th measured value
General parameters
Group 0 - general parameters
1) General parameter
2)
parameter
n) parameter
General
General
Measured value specific parameters
Group 1 - parameters of the 1st measured value
1) Parameters of the 1st measured value
2) Parameters of
n) Parameters of
the 1st measured value
the 1st measured value
> 2 s
switch
Group 2 - parameters of the 2nd measured value
1) Parameters of the 2nd measured value
2) Parameters of
n) Parameters of
the 2nd measured value
the 2nd measured value
from NA
> 2 s
Group 3 - parameters of the 3rd measured value
1) Parameters of the 3rd measured value
2) Parameters of
n) Parameters of
the 3rd measured value
the 3rd measured value