JUMO Wtrans E01, Руководство по эксплуатации

Страница: 43 / 64

43
8 Operating the measuring probe
4. To confirm the first digit, press the key.
The bottom segment of the second digit to the right flashes.
5. Repeat steps 3 and 4 until all digits are edited
(min. 1 digit, max. 4 digits).
6. To confirm the code, press the key.
The bottom segment of the last entered digit no longer flashes.
7. Confirm the code entry by pressing the key for > 2 s.
If the code is correct, "truE" appears for 0.3 s.
The measuring probe switches to the parameter level.
If the code is incorrect, "Err" appears for 0.3 s.
The measuring probe returns to the normal display.
NOTE!
To deactivate, set the code for the parameter level to 0.
 chapter 9.2.2 "General parameters", Page 48