JUMO Wtrans E01, Руководство по эксплуатации

Страница: 52 / 64

10 Setup program
52
10.1.1 Interface
The USB interface is designed only to configure the measuring probe. Continuous operation is not ad-
missible.
10.2 Hardware and software requirements
The hardware and software requirements can be obtained from the manufacturer's website.
NOTE!
If a connection to the measuring probe or receiver cannot be established using the setup program, you
may need to update the setup program.
The latest version of the setup program can be downloaded from the manufacturer's website.
10.3 Establishing the connection between the laptop/PC and measuring
probe
The connection between the measuring probe and laptop/PC is established using a USB cable, type A
USB connector to a Mini-B USB connector.
CAUTION!
Permanent interface operation!
The USB interface is designed only to configure the measuring probe. Continuous operation is not ad-
missible.

Please ensure that the interface connection is disconnected after the setup data transfer.
NOTE!
The setup data can also be transferred between the measuring probe and the laptop/PC without the bat-
tery or external voltage supply! The measuring probe is well supplied via the USB interface.
Connection for Type Terminal assignment
USB connection to laptop/PC USB interface (Mini-B) Standard (5-pin)