JUMO Wtrans E01, Руководство по эксплуатации

Страница: 54 / 64

10 Setup program
54
10.4 Configuring the transmitter
This chapter explains how to configure a transmitter using the setup program. To do this, the transmitter
and the laptop/PC must be connected via a USB cable.
10.4.1 Establishing the communication
There are two different ways to establish the communication between the transmitter and setup program:
•
Establishing the communication using the "Assistant for device settings".
This is the case when the setup program is used for the first time
(Device list empty).
• Establishing the communication without using the "Assistant for device settings".
This is the case when the receiver/transmitter and setup program have already communicated with
one another (device list with entries).
Establishing the communication using the "Assistant for device settings"
1. Start the setup program.
2. Select the "Establish connection" function in the "Data transfer" menu.
The "Assistant for device settings" appears.
3. Select the transmitter under the "Device version" and confirm by pressing "Next".
4. Exit the assistant by clicking "Finish".
The device list with the selected transmitter appears.
5. Click the "Connect" button.
The device list is closed, the assistant is exited, and communication between the transmitter and set-
up program is established.
Establishing the communication without the "Assistant for device settings"
1. Start the setup program.
2. Select the "Establish connection" function in the "Data transfer" menu.
The device list containing all devices entered is displayed.
3. Left-click the desired transmitter data record to select it.
4. Click the "Connect" button.
The device list is closed, the assistant is exited, and communication between the transmitter and set-
up program is established.
10.4.2 Extracting the current transmitter parameters
1. In the "File" menu, select the "New" function.
The "Device assistant" starts.
2. Confirm " User-defined setting " by clicking the "Next" button.
3. Select "Frequency band" and confirm with "Next".
4. Select the receiver variant and confirm by clicking "Next".
5. Exit the overview of the selected settings by clicking "Finish".
The current settings are displayed in the setup program.
6. Select the desired transmitter data record from the navigation tree by left-clicking it.
7. In the "Data transfer" menu, select the "Data transfer from device" function.
8. Exit the "Save file" prompt by clicking "Skip".