JUMO Wtrans E01, Руководство по эксплуатации

Страница: 38 / 64

7 Introduction to operation
38
7.4 Parameter level (PA) (configuring parameters)
By changing to the parameter level (PA), the parameter and parameter value are displayed alternately.
The display changes after 40 s if none of the operating keys are pressed. Once this time has passed, it
will automatically return to the normal display (NA).
Keys and key combinations
 chapter 9.2 "Parameter level (PA)", Page 46
Keys Function
or Change to the next or previous parameter
> 2 s Change to the first parameter of the next group (general, measured value 1, 2, 3,
or 4) (large jump)
> 2 s Change to the first parameter of the previous group (general, measured value 1, 2,
3, or 4) (large jump)
> 2 s Return to the normal display (NA)
Select the currently displayed parameter value for editing
> 2 s If parameter editing is selected:
Save the currently displayed value in Parameter.
or If parameter editing is selected:
Selection of the possible parameter settings;
changing of values step by step.
If parameter editing is selected:
Direct entry of the parameter value through digit by digit editing of the desired pa-
rameter values (only possible with numerical values!).