KE-2050/KE-2060, KE-2050R/2055R/KE-2060R Maintenance Manual
1-25
(3) Hold the cables with the cable clamp X to fix it.
1
40002233(750mm)
40002234(500mm)
Fix at the marked position.
2233
（
945mm
）
Fix at the marked position.
Guideline: 45mm
Mark displacement amount of
40002234
Pull the 40002233 cables in
the direction of
c
and check
that the white line is hidden.
Then get the cables together in
the direction of
d
and fix at the
marked position.
Align with the marking of
40002233 and place a mark
on the side of 40002234.
2
1
2
Cable check inside the plastic rail:
Press in the cables by hand and check that they
yield.
Figure 1-8-3-4
c
For the (upper) head side, align the marking positions of 40002233 and 40002234 cables with
the end (on the head side) of the FC case.
d
For the lower side, align the marking with the end (on the plastic rail side) of the X cable clamp.
At this time, pull the 40002233 cables in the direction of
c
shown in the figure above and check
that the white line is hidden. Then get the cables together in the direction of
d
and fix at the
marked position.
e
Cable check inside the plastic rail:
Press in the cables inside the plastic rail by hand and check to make sure that they yield. The
40002234 cables shall be placed about 45mm apart from the end surface of the clamp.
Rev. 2.00
