5 OPERATION
EM210F-1
5-49
Fig. 5.43 Bake Out/ACD Heat screen
?
If the refrigerant drainer cable is disconnected while the ACD HEAT button lamp is
lit, the lamp will remain lit. In this case, connect the cable to the tank again, and
wait for the lamp to go out.
?
In order to terminate trap heating before the trap reaches room temperature, depress
the “Off” button for few seconds on the screen.
CAUTION
Do not remove the drainer just after the ACD HEAT built-in lamp goes
out. You may get burnt if you touch the drainer just after the lamp goes
out, since the drainer is not cooled down.
