Jaden DLB1-0D40S2G, Инструкция по эксплуатации

Страница: 80 / 173

-80-
If a parameter needs to be displayed during the running, set the corresponding bit to 1, and set
P7.03 to the hexadecimal equivalent of this binary number.
P7.04
LED display running
parameters 2
0000~FFFF
0
☆
If a parameter needs to be displayed during the running, set the corresponding bit to 1, and set
P7.04 to the hexadecimal equivalent of this binary number.
These two parameters are used to set the parameters that can be viewed when the Inverter is in
the running state. You can view a maximum of 32 running state parameters that are displayed from the
lowest bit of P7.03.
P7.05
LEDdisplay stopparameters
0000~FFFF
33 ☆
If a parameter needs to be displayed during the running, set the corresponding bit to 1, and set
P7.05 to the hexadecimal equivalent of this binary number.
7 6
5 4 3 2 1 0
DI status
set
frequency
(Hz)
bus
voltage
(V)
DO status
AI1 voltage
AI2 voltage
AI3 voltage
counter
15 14 13 12 11 10 9 8
Length
reserved
reserved
reserved
PLC phase
Load speed
PID setting
Input pulse frequency(Hz)
15 14 13 12 11 10
9 8
Linear speed
Communication
Encoder speed
Power-on time (Hour)
Running time (Min)
Input pulse frequency (Hz)
X
Y
7
6
5 4 3 2 1 0
PID feedback
Remaining running time
PLC phase
Input pulse frequency (kHz)
Running frequency 2(Hz)
AI1 voltage
before correction
(V)
AI2voltage
before correction
(V)
AI3 voltage
before correction
(V)
7 6 5 4 3 2 1 0
Running
frequency 1(Hz)
Set
frequency
(Hz)
DC bus
Voltage (V)
Output
voltage (V)
Output
current
(A)
Output
power (kW)
Output
Torque (%)
DI status
15 14 13 12 11 10 9 8
D0 status
Counter value
Length
Load speed
PID setting
AI1 Voltage (V)
AI2 Voltage (V)
AI3 Voltage(V)
(V)
(V)
(V)