Jaden DLB1-0D40S2G, Инструкция по эксплуатации

Страница: 111 / 173

-111-
4.14 Multi-reference and simple PLC:PC.00-PC.51
The DLB1 multi-reference has many functions. Besides multi-speed, it can be used as the setting source
of the V/F separated voltage source and setting source of process PID. In addition, the multi-reference is
relative value.
Code Description Setting range Default
Restric
tions
PC.00
Multi-reference 0 -100.0%~100.0%
0.0% ☆
PC.01
Multi-reference 1 -100.0%~100.0%
0.0%
☆
PC.02 Multi-reference 2 -100.0%~100.0% 0.0%
☆
PC.03
Multi-reference 3 -100.0%~100.0%
0.0% ☆
PC.04
Multi-reference 4 -100.0%~100.0%
0.0%
☆
PC.05 Multi-reference 5 -100.0%~100.0% 0.0%
☆
PC.06
Multi-reference 6 -100.0%~100.0%
0.0%
☆
PC.07
Multi-reference 7 -100.0%~100.0%
0.0%
☆
PC.08
Multi-reference 8 -100.0%~100.0%
0.0%
☆
PC.09
Multi-reference 9 -100.0%~100.0%
0.0%
☆
PC.10 Multi-reference 10 -100.0%~100.0% 0.0%
☆
PC.11
Multi-reference 11 -100.0%~100.0%
0.0%
☆
PC.12 Multi-reference 12 -100.0%~100.0% 0.0%
☆
PC.13
Multi-reference 13 -100.0%~100.0%
0.0%
☆
PC.14
Multi-reference 14 -100.0%~100.0%
0.0%
☆
PC.15 Multi-reference 15 -100.0%~100.0% 0.0%
☆
Multi-reference can be the setting source of frequency, V/F separated voltage and process PID.
The multi-reference is relative value and ranges from -100.0% to 100.0%.
As frequency source, it is a percentage relative to the maximum frequency. As V/F separated
voltage source, it is a percentage relative to the rated motor voltage. As process PID setting source, it
does not require conversion.
Multi-reference can be switched over based on different states of DI terminals. For details, see the
descriptions of group P4
PC.16
Simple PLCrunning mode
Stop after the Inverter runs one cycle
0
0
☆
Keep final values after the Inverter runs
one cycle
1
Repeat after the Inverter runs one cycle
2