55
ATTENTION
- THIS OPERATION MUST BE DONE BY A TRAINED PERSON WITH THE SPRAYER
EMPTY AND WELL SCOTCHED ON FIRM AND LEVEL GROUND.
- KEEP AWAY PEOPLE OR ANIMALS WHEN SETTING THE TRACK WIDTH.
OPERATION AND ADJUSTMENTS
ADJUSTING THE AXLE - TURNOVER
For working on irregular ground, the axle can be turned over for improved safety.
You should never overcome raised grounds or other obstacles at high speed.
Slow down in this situation. Also, in order to avoid damage to the sprayer, always move at
low speed when the tank is full.
The table below shows the recommended track width according to the ground
declivity.
ADJUSTING THE AXLE GROUND CLEARANCE
- Raise the trailer back enough to suspend the
tires over the ground.
- Loosen the 4 nuts (1) that fasten the sliding
end to the axle.
- Remove the bolt (2) that stops the movement
of the sliding end.
- Invert the assembly of the axle sliding end as
shown in the figures beside.
axle
semiaxle
1
2
- Fit the semiaxle in the desired position.
- Loosen the 4 nuts (1).
- Fit the bolt (2).
TRACK WIDTH(in)
70.86
74.80
78.73
82.67
86.61
DECLIVITY
26%
27 %
29 %
30%
31%
ground
clearance
0.60 m
ground
clearance
0.56 m
semiaxle turned
down
semiaxle turned
up