54
OPERATION AND ADJUSTMENTS
TRACK WIDTH - ADVANCE 3000/ADVANCE 3000 VORTEX
ATTENTION
- THIS OPERATION MUST BE DONE BY A TRAINED PERSON WITH THE SPRAYER
EMPTY AND WELL SCOTCHED ON FIRM AND LEVEL GROUND.
- KEEP AWAY PEOPLE OR ANIMALS WHEN SETTING THE TRACK WIDTH.
TRACK WIDTH (in)
TIRES
70.8
88.58
MINIMUM
MAXIMUM
GROUND
CLEARANCE (in)
TIRES
22.04 and 23.62
12.4 x 36
12.4 x 36
Adjusting the track width (conventional axle)
- Raise the trailer rear enough to suspend the tires over the ground.
- Loosen the bolts on the semiaxle fastening plate.
NOTE:
- The letter "A" indicates the distance between the tire center and the external face of the
chassis.
- The letter "B" indicates the distance between the tires center, therefore the sprayer track
width.
- The letter "C" indicates the location of the semiaxle motion stop screw., therefore the sprayer
maximum track width (88.58 in).
NOTE: This screw must only be removed for maintenace of the semiaxle, when the machine
must be scotched (suspended) by the chassis.
ATTENTION: To adjust the track width, it is necessary to loosen the four bolts of the plate
fastenining the semiaxle to the sprayer axle. For safety reasons, do not adjust both sides at
the same time.
B
Track width setting
- If "A" = 16.68 in, then "B" will be 70.80
in, and so on:
A (in)
16.68
18.60
20.64
22.56
24.60
26.52
28.44
B (in)
70.8
75
78.72
82.56
86.52
90.48
94.44
A - distance between the
tire center and the exter-
nal face of the chassis
semiaxle
axle
semiaxle
fastening plate
B - track
width
C - semiaxle motion
stop screw
chassis
A