49
OPERATION AND ADJUSTMENTS
NOZZLES FILTER:
Use 50 or 60 mesh for all nozzles models.
TECHNICAL CHARACTERISTICS
Spray pattern ..................................................... Hollow cone
Spray angle ........................................................ 75 to 80 degrees @ 150 psi
Nozzle Material ...................................................
Sintered alumina
Flow identification
.............................................. Nozzle color and part #
HIGH QUALITY
Series JA hollow cone nozzles are produced by processes developed for exacting markets
of mechanical engineering, space and aerospace industries. A special mold injection process
makes a perfect orifice on the nozzles, giving better quality to the surface finish than that achie
-
ved by machines. And the result is better coverage and more homogenous spraying.
These nozzles are approved by international quality standards, ensuring an outstanding spray
cone uniformity and flow rate of nozzles.
HIGH WEAR RESISTANCE
The alumina-sintered nozzles are almost as hard as diamond and resist yet the most corro-
sive products. This provides perfect stability for long time concerning all requirements such as
flow rate, coverage and droplet size.
TABLE 1 - FLOW RATE
30
45
60
90
120
150
180
210
240
270
300
PRESSURE
(psi)
Flow rate (gpm)
JA - 1
JA - 1.5
JA - 2
JA - 3
JA - 4
JA - 5
0.30
0.36
0.42
0.50
0.58
0.64
0.70
0.75
0.85
0.90
0.94
0.24
0.29
0.33
0.39
0.45
0.50
0.54
0.58
0.61
0.63
0.67
0.16
0.20
0.23
0.28
0.31
0.35
0.38
0.41
0.44
0.46
0.48
0.12
0.14
0.16
0.20
0.22
0.26
0.27
0.29
0.32
0.33
0.37
0.08
0.10
0.11
0.13
0.15
0.17
0.18
0.20
0.21
0.22
0.23
0.06
0.07
0.08
0.10
0.11
0.13
0.14
0.145
0.15
0.16
0.19
Nozzle model
HOLLOW CONE NOZZLE
HIGH QUALITY CERAMIC
SERIES JA