29
MAIN COMPONENTS OF SPRAYER
ACCESS COVER TO THE HYDRAULIC RESERVOIR FILTER
AND THE HYDRAULIC CONTROL
To access the hydraulic reservoir filter or the boom operation hydraulic control, just
loosen the 4 screws that fasten the cover to the chassis (A).
Your sprayer may be equipped with the wide-angle C.V. PTO shaft (optional) or the
conventional PTO shaft, both shown in the figures below.
The C.V. PTO shaft has an advantage over the conventional PTO shaft: it allows to
make turns of up to 75 º with no need to disengage the PTO.
Both PTO shafts have shields to provide protection to the operator and prevent
damage the crop.
C.V. PTO SHAFT
(OBLIGATORY USE ON THE ADVANCE 3000 VORTEX)
CONVENTIONAL PTO SHAFT
(ADVANCE AM-18)
NOTE:
For instruction in detail, please refer to the
section MAINTENANCE - PTO SHAFT.
NOTE:
For instruction in detail,
please refer to the section
MAINTENANCE - PTO SHAFT.
STAIRS TO ACCESS THE MAIN TANK
The spray tank must be accessed through the stairs fastened on the chassis (B). It can
be folded away to avoid damages to the crop.
B
A