28
MAIN COMPONENTS OF SPRAYER
IN-LINE FILTER
For each boom section there is a filter assembled in the pressure line.
The function of these filters is to prevent impurities from reaching the nozzles.
The main characteristics of these filters are the following:
Maximum working pressure ................... 300 psi
Filtering element mesh ........................... 80
Hose fitting
............................................. ø 3/4"
Maximum flow rate
................................. 39.62 gpm
LOW PRESSURE GAUGE KIT
GENERAL CARE WITH THE LOW PRESSURE GAUGE KIT
The maximum pressure of this kit is 100 psi.
The pressure regulators of sprayers can easily reach above 100 psi pressures, what can
damage the pressure gauges.
To ensure longer life of the pressure gauge, close the valve after calibrating the sprayer.
ATTENTION:
- Clean the filter whenever filling the sprayer, or when
necessary.
- Do not exceed the recommended maximum pressure
(300 psi).
The low pressure gauge kit was designed
for checking the actual pressure on nozzles.
It can be installed on the sprayers assem-
bled with both universal nozzle caps and
fittings and complex nozzle holders, such
as double and quadruple units.
LOW PRESSURE GAUGE KIT (OPTIONAL)