56
MAINTENANCE
- After the first working hours, check if the bolts, nuts and clamps are well tightened.
Give special attention to the tank base bolts, lug nuts and axle fastening bolts.
- Daily, after finishing the spray application, put clean water in the tank, remove the nozzles
and run the sprayer till empty.
- Remove, clean and replace the nozzles and filters.
- Clean the main filter.
- Wash the outside and inside of the sprayer.
GUIDELINES
ATTENTION
NEVER WASH THE SPRAYERS OR PROTECTIVE CLOTHING (MASK, GLOVES,
WORKING CLOTHES, ETC.) IN OR CLOSE TO RIVERS, LAKES, STREAMS,
BROOKS, DAMS, ETC.
-
Take off and wash all the individual protective clothing.
- Wash the working clothes separately from other clothes.
- Take a shower with plenty of water and soap and put on clean clothes.
These procedures will avoid problems with the sprayer in future applications as well
as protect your life.
COMPONENTS
SUCTION FILTER
- The frequency of filter cleaning depends
on the quality of water and type of chemicals
used.
- Clean the filter when filling the tank or
whenever necessary.
filtering
element
valve
packing ring
FVS - 200
PRESSURE REGULATOR
- Disassemble the pressure regulator every 100 working hours or at the end of each spraying
season.
- Check for wear on the valve and valve seat and replace them if necessary.
CABLE ACTUATED
CONTROL
CONTROL WITH ELECTRIC
ACTUATION