64
MAINTENANCE
CABLE ADJUSTMENT
As the time goes by, it may be necessary to adjust the booms hydraulic actuation cables,
if the unfolding and folding operation is defective.
To adjust proceed as follows:
- Loosen the nut (1).
- Loosen both bolts (2).
ATTENTION: Do not loosen these bolts all the way,
but enough to turn the adjusting rod.
- Turn the adjusting rod (3) clockwise or
counterclockwise, depending on the need of
adjustment.
NOTE: This adjustment should be made with the
sprayer running, and the cylinder that showed problem
should be constantly actuated during the adjustment
so as not to tighten or loosen excessively the adjusting rod.
- Once the adjustment is made, retighten the nut (1) and the bolts (2).
HYDRAULIC CONTROL (CABLE ACTUATION)
2
3
1
WARNING
ALWAYS STOP THE MACHINE AND TURN OFF THE THE TRACTOR BEFORE
ANY AND ALL KIND OF MAINTENANCE AND USE APPROPRIATE PROTECTIVE
CLOTHING, SUCH AS: GLOVES, BOOTS, GOGGLES, ETC.
BELTS TENSION
- Check the belts tension periodically.
- Press the agitator belts as shown in the figure beside.
When pressed it should slack 0.39 to 0.59 in. DO NOT
USE SHARP-ENDED OR CUTTING TOOL
MECHANICAL AGITATOR
At any sign of the drain leak, replace the
mechanical seal.Contact your nearest Jacto
dealer.
drain