32
- Adjusting the drawbar
Fit the hitch pin in the proper hole (1 or 2) to vary the
distance between the PTO and the hitch point (figure
A).
NOTE:
For heavy load use the hole # 2 (figure A).
Distance between
the PTO and the
hitch point
Maximum
(static)
load
in lift
Hole
1
2
13.77 in
9.84 in
1,003.10 lb
1,300.72 lb
C
B
- Adjusting the sprayer height and the drawbar
Position the tractor's drawbar so that the sprayer works on level after hitching (figure B).
Invert the drawbar to vary the height of the hitch point (figure C).
ATTENTION
The figures shown in above table were obtained with a 63 HP tractor. For
explanation in detail, please consult the operator's manual of your tractor.
SETTING UP THE TRACTOR
2
1
A = A
A
A
A