22
MAIN COMPONENTS OF SPRAYER
SPRAY TANK FILLER
(OPTIONAL)
There are two ways to fill the tank:
- THROUGH THE FONTE LIMPA FILLER UNIT
- THROUGH THE QUICK FITTING
1) USING THE FONTE LIMPA FILLER UNIT
- Put 13.20 gallons of water in the spray tank.
- Disconnect the intake hose from the chemicals mixer valve (2).
- Connect the filler unit (3) hose to the bypass valve (1) hose.
- Put the filler unit (3) in the water source and the end of its discharge hose (4) at the tank
opening.
- Run the sprayer at 540 rpm at the PTO.
- Set the bypass valve (1) lever in the position of chemicals mixing.
- After filling, set the by pass valve (1) lever in the working position (pointed to the control) and
connect again the chemicals mixer (2) hose.
PROTECT THE ENVIRONMENT.
IT IS EXTREMELELY IMPORTANT FOR A HEALTHY LIFE.
ATTENTION:
- THE SPRAYER FILLING OPERATION MUST BE DONE IN PLACES APPROPRIATE
FOR THIS PURPOSE OR THROUGH APPROPRIATE TANKERS.
- NEVER COLLECT WATER FROM RIVERS, LAKES, DAMS , STREAMS, ETC. BY
USING THE SPRAYER'S RETURN SYSTEM.
flow bypass
valve (1)
filler unit (3)
tank
chemical
Pump
chemical
control
chemicals
mixer valve (2)
filler unit
discharge hose (4)