26
MAIN COMPONENTS OF SPRAYER
OPERATING THE CHEMICAL CONTAINER RINSE NOZZLE
- Set the lever (1) in a position so as to allow free water flow from the auxiliary tank to the
spray pump.
- Set the bypass valve (2) lever in the position "chemicals mixer".
- Hold the chemical container over the rinse nozzleand operate the chemicals mixer (3) red
lever for a few seconds (detail A). Then, operate the black lever to wash inside the chemicals
mixer.
- Set the bypass valve (2) lever in the working position (pointed to the spray control).
- Set the lever (1) in a position so as to make the pump draw the mixture from the spray tank.
Watch out for sprinkling while rinsing the containers. Use protective clothing.
ATTENTION:
Operate the chemicals mixer red lever
only
after positioning the chemical container
over the rinse nozzle. This will keep you from
being wetted with water available for washing
inside the chemicals mixer or even the
chemical mixture or water from the spray tank.
flow bypass
valve (2)
chemicals
mixer (3)
chemical
pump
lever to divert
the flow of the
spray and auxi-
liary tanks (1)
auxiliary
tank
spray
tank
ATTENTION
During the operation, watch the
volume of water that being transported to
the spray tank considering the chemical
quantity to be added in order not to
overflow the spray tank.
main
filter
Note:
the auxiliary tank is
designed to be filled with
clean water only. Never
put chemicals in it.
DETAIL A - Chemicals mixer lever
- Black lever: to rinse inside the chemicals mixer
- Red lever: to rinse the chemical containers