en-65
8
MAINTENANCE & LUBRICATION
A
8.4
ENGINE COOLANT ____________________________________________________
Check The Engine Coolant Level
(a)
The level of coolant in a cold expansion tank must be
between the MAX and MIN level indicators.
(b)
If you need to fill the tank, remove the plastic cap and
fill with the correct anti-freeze mixture (see section
8.1).
(c)
Replace the plastic cap.
How To Change Coolant
(a)
To drain coolant, open the drain valve on the engine
block (A) and remove the hose from radiator. Drain
the engine oil into a container.
(b)
Close the drain valve on engine block (A) and put
the hose on to the radiator. Make sure all the hose
clips are tight.
(c)
Fill the cooling system with the correct anti-freeze
mixture, see section 8.1. Fill system through the
expansion tank.
(d)
The level of coolant in a cold expansion tank must
be between the MAX and MIN level indicators.
(e)
Run the engine for approximately 5 minutes or until the thermostat opens.
(f)
Check the level of coolant in expansion tank. Fill the tank if more coolant is needed.
CAUTION
The Anti-freeze Can Damage Your Skin. Use
Gloves When You Use Anti-freeze. If Anti-freeze
Touches Your Skin, Clean The Area Immediately.
CAUTION
Discard Used Anti-freeze As Shown In Local
Safety Regulations.
Содержание Fairway 250 JGZZ250
Страница 8: ...en 7 2 INTRODUCTION NOTES ...
Страница 63: ...en 62 8 MAINTENANCE LUBRICATION 8 2 8 2 8 3 8 4 8 2 8 7 8 8 Fairway 250 Series JZ ...
Страница 73: ...NOTES __________________________________________________________________ ...
Страница 87: ...NOTES __________________________________________________________________ ...
