37
item Controller BL 1-04 /C
― Product manual
Characteristic
Value
Sensor type
Analogue
Sensor type
Silicon temperature sensor PTC/NTC,
e.g. KTY84-130 or similar
Linear/non-linear, parameterisable (10 nodes)
Linear/non-linear, parameterisable (10 nodes)
Measuring range
from 300 Ω to 20 kΩ (+-10%)
Output voltage
+ 3,3 V
Output current
1.7 mA max. (via 2 kΩ measuring resistor)
Internal resistance
approx. 2 kΩ
Output for the holding brake in the motor
Characteristic
Value
Nominal voltage
24 V
Nominal current
2 A (total of all digital outputs and of the holding
brake: 2.5 A max.)
Voltage drop referred to the 24 V
input with a load current of 2 A
approx. 1.5 V
Overload protection
Yes, current limitation to 3 A max.
Overvoltage protection
up to 60 V
Internal flyback diode
Yes
HIPERFACE DSL
®
connector [X6]
Characteristic
Value
HPF_DSL-,
In accordance with the HIPERFACE DSL
®
Baud rate
9.37 MHz
Frame rate
12.1 to 27 µs
Supply voltage
10 V (250 mA)
Supported transfer modes
Transfer of short and long messages with
storage of the set of parameters in the encoder
Characteristic impedance of the cable and line termination
110 Ω
