55
item Controller BL 1-04 /C
― Product manual
First, wire the servo drive completely. Then, switch on the 24 V supply and the mains power supply.
Configuration on the device [X9]
Weidmüller SL 5.08HC/09/90G 3.2SN BK BX
Mating connector [X9]
Weidmüller BLF 5.08HC/09/180 SN BK BX
Pin assignment [X9]
Pin assignment
WEIDMÜLLER
BLF 5.08HC/09/180 SN BK BX
1
2
3
4
5
6
7
8
9
GND
24V
PE
R_CH
R_EXT
ZK-
N
L
ZK+
Figure 21: Pin assignment: power supply connector [X9]
Pin
Name
Specification
1
GND
Supply voltage reference potential
2
24V
Supply voltage for the control module and holding brake
3
PE
Connection of the protective earth (ground) conductor of
the mains power supply
4
R_CH
Braking resistor connection
5
R_EXT
Braking resistor connection
6
ZK-
Neg. DC bus voltage
7
ZK+
Pos. DC bus voltage
8
N
Neutral conductor
9
L
Phase conductor/mains phase
Cable type and configuration [X9]
The cable names that are stated refer to cables made by Lapp. They have proved to be reliable and are successfully used
in many applications. However, it is also possible to use comparable cables from other manufacturers, for example Lütze or
Helukabel. A single-phase circuit breaker with the listed characteristics ("Circuit breaker") must be used in the mains supply
line.
