Platform Power Delivery Guidelines
184
Design Guide
Table 12-9. Intel
®
ICH3-S Decoupling Recommendations
Power
Decoupling Requirements
Decoupling Placement
V_CPU_IO
Use
one
0.1 µF decoupling capacitor.
•
Locate within 100 mils of the
ICH3-S processor interface balls.
VCCRTC
Use
one
1.0 µF
decoupling capacitor.
See
for the External Circuitry.
•
Locate within 100 mils of the
VCCRTC interface ball (ball
AB6).
VCC_3.3
Requires
six
0.1 µF decoupling capacitors.
•
Distribute around the ICH3-S
package sides within 100 mils of
the package balls:
– Top near AUX/PCI
– Left across the PCI and LPC
– Bottom near IDE
– Right near GPIO[43]
VCCSUS_3.3 Requires
two
0.1 µF decoupling capacitors.
•
Place one capacitor on the top
side within 200 mils of the USB
center.
•
Place one capacitor on the
bottom side near the
VCCSUS_3.3 supply.
VCC_1.8
Requires
four
0.1 µF decoupling capacitors.
•
Locate 2 capacitors distributed
local to the hub interface, within
50 mils of the package HI balls.
•
Distribute the remaining
capacitors on the left and bottom
sides of the package for core
delivery.
VCCSUS_1.8 Requires
one
0.1 µF decoupling capacitor.
•
Locate within 200 mils of the
ICH3-S, Balls B23 and C23.
5VREF_SUS
Requires
one
0.1 µF decoupling capacitor.
V5REF_SUS is the reference voltage for some 5 V
tolerant inputs in the ICH3-S (USB data and over
current signals). V5REF_SUS must power up before
or simultaneous to VCCSUS_3.3. It must power
down after or simultaneous to VCCSUS_3.3. (For
most platforms, this power sequencing is not an
issue as VCCSUS_3.3 is derived from
5VREF_SUS.)
V5_REF
Requires
one
0.1 µF decoupling capacitor.
V5_REF is the reference voltage for most 5 V
tolerant inputs in the ICH3-S. Tie to pins V5REF[2:1].
V5REF must power up before or simultaneous to
VCC_3.3. It must power down after or simultaneous
to VCC_3.3.
Содержание Xeon
